How To Mount A Scope On An Ar15
Last Updated on
Finally getting that new scope for your AR-15 is an exciting time. There is nothing amend than having something new for your burglarize, but now y'all have to attach it. Sure, y'all could get to the store and accept them do it, but they are likely to make it right for them, not you. You are the i using the rifle after all. Learning how to fix your rifle can be daunting, but information technology is an easy job with a few steps.
Don't worry, we walked you through everything you need to exercise in order to have your scope mounted perfectly. Follow the steps and you volition become your telescopic mounted in no fourth dimension.
Tools You Demand
No matter the job, you lot are going to demand tools. Mounting a scope is the same style, and in that location are tools you need or you can't do the job. They are piece of cake to go your hands on and are made to make this task equally easy as possible.
- Torque Wrench: The job cannot exist done without this tool. This is what you are going to use to mount the burglarize scope to the AR-fifteen and continue information technology steady.
- Scope Mount: This is the link between the gun and the scope.
- Screwdriver: Depending on your telescopic, you may need a certain type of screwdriver. Check your scope to brand sure y'all have the right kind before starting. I of the most popular is the hex chip screwdriver.
- Bubble Level: This tool merely is used to ensure that your mountain is level during the installation.
- Riflescope: Your chosen optic for your AR-xv.
- Scope Rings: Not every mount comes with them, you lot may accept to buy your ain. Go on them labeled.
- Gun Rest: This holds your burglarize in place. Having a manner to move freely effectually your rifle is key, and it keeps information technology sturdy and in place for the installation.
Training Earlier Mounting
Paradigm Credit: zachfoltz12, Pixabay
While it is tempting to simply bound right on into installing your new telescopic, in that location are a few steps you lot need to have. The very first step, and the about critical, is you must make sure your rifle is empty, unloaded, and the safety is on. In that location have been countless gun owners who thought their gun was unloaded, merely to observe out that it was not by accident.
Once y'all know the rifle is safe, place it on your gun rest. Apply the bubble level to brand sure your rifle is level and suit if not. Checking the level here sets you lot up for successfully mounting your scope on the first attempt.
Make sure your burglarize is secure in the gun mount, and the mount is secure on the table you are working on.
Your scope rings need preparing too. Most rings come up in pairs, and those pairs are made to fit each other perfectly. Accept them apart and label them so you know which ring goes with which, and which is the bottom and which is the top. By keeping the pairs together, it allows for the best possible fit for your scope.
Attaching the Mount
Epitome Credit: meketrefe, Pixabay
Once your rifle is stable, have the mount and identify it on the rifle. All mounts come up with an didactics guide on how to place it on the rifle. Take the screws that come with the mount and screw them into place by hand until the mount can no longer fall off. Once you do that, have the torque wrench and tighten the screws into place. Make sure to non go in a higher place the torque limit or the mount could break.
The instructions on your mount will tell you the torque limit on your screws. One time you have the mount tightened, take your chimera level and check both the parallel and perpendicular levels. Adjust the screws as necessary to accomplish the proper level. It may take some fiddling, but it is of import before heading to the side by side step in the process. This is where you will add together in the bottom half of the mountain rings that come with your mountain. Just the lesser half, the top is for the side by side pace.
Attaching the Scope
Image Credit: meketrefe, Pixabay
You lot tin can now mount your scope. Place the scope on the mount rings you gear up in the previous step. Make certain the scope is even a flat on both rings earlier placing the meridian rings on. From there use your screwdriver to tighten the screws to nigh 80% in an Ten pattern. Like attaching a tire to a auto, you don't go around clockwise as it can mess up the level.
This is where you are going to have to check to see if your heart relief is in the correct spot. Take the gun off the mount if you need and cheque the relief. If it is off, place the burglarize back and adjust as necessary. Making sure your telescopic is where it needs to be is disquisitional.
Finalizing and Leveling
Prototype Credit: vonMuehle, Pixabay
Take your bubble level for the final time and bank check both the parallel and perpendicular levels. Adjust the screws as needed to ensure that your scope is level. One time you lot take it where you need, tighten the screws in the same Ten pattern as earlier. Re-check the level to ensure nothing went awry during the process.
Your scope is at present mounted deeply onto your AR-fifteen. From here you lot will check the alignment of the reticle and adapt as needed.
Conclusion
In that location you have information technology. A straightforward way on how to mount a scope on an AR-15 without worry. All that is left is to go out and savour your new telescopic. Make sure to go on information technology level, and if information technology gets loose go dorsum to the attaching stage, and make sure everything is gear up where it should be.
You might also be interested in some of our most favorite posts:
- How to Take Photos Through a Spotting Telescopic (Digiscoping)
- How To Mountain a Rifle Scope: five Easy Steps (With Pictures)
- Prism Scope vs Red Dot Sight: Which Is Improve?
Featured Image Credit: 8089514, Pixabay
Source: https://opticsmag.com/how-to-mount-a-scope-on-ar15/
0 Response to "How To Mount A Scope On An Ar15"
Post a Comment